Membrane Chemical Compatibility

This guide summarizes and compares chemical compatibility data from multiple manufacturers. It provides general guidance on the suitability of different membrane materials for short-term contact under laboratory conditions.

Actual compatibility may vary depending on the chemical concentration, temperature, exposure time, specific membrane formulation and construction, and filter housing material. The ratings below should be used as a general guide; always verify compatibility with the manufacturer for the specific product and application.

Chemical / Solvent PTFE NY MCE PES RC CA GF PVDF PP
Acetic acid, 25% RLLLRLRRR
Acetone RRNNRNRNR
Acetonitrile RRNNRLRLL
Ammonium hydroxide, 25% RRNLLNRLR
Chloroform RRLNRNRRL
Dichloromethane RLNNRNRLL
Diethyl ether RRLNRLRRL
Dimethyl sulfoxide (DMSO) RRNNRNRNR
Dioxane, tetrahydrofuran (THF) RRNNRNRLL
Ethanol, 70% RLRRRRRRR
Ethyl acetate, methyl acetate RRNNRNRLL
Formic acid, 25% RNNNRLRN/AR
Hexane RRRRRLRRN
Hydrochloric acid, 15% RLNLNLRLR
Hydrochloric acid, 25% RNNRNNRLL
Isopropanol, n-propanol RRLRRRRRR
Methanol, 98% RRNLRLRRR
Nitric acid, 25% RNLLNNLLR
Phosphoric acid, 25% RNLLRLLLL
Sodium hydroxide, 3 N (12%) RRNLNNNNL
Toluene, benzene RRRNRLRRN
Triethanolamine RRLLRRRLN/A
R – Recommended: Generally suitable for the specified conditions.
L – Limited compatibility: Compatibility may be restricted; preliminary testing is recommended.
N – Not recommended: The material is generally unsuitable for the specified conditions.
N/A – Insufficient data: Compatibility data are not available or are insufficient to provide a recommendation.